how to program CPLD

[balaseven]

Hi all,


Could tell me how to program CPLD(cool Runner-II)?
Example:XC2C25


Thanks
balaseven

[Abhilash41]

Have u designed the logic and generated the programming file?

Assuming that u have :
get a JTAG programming cable.Connect your CPLD's JTAG signals and voltage reference to the semi-industry-standard 14-pin 2mm connector. Check the programming cable's data sheet for the connector pinout. Use the cable to connect your computer and your CPLD, and use Xilinx's iMPACT software (included with ISE) to download your programming file to the CPLD.

If u need help with the programming post a reply.

[Abhilash41]

Found this tutorial. might be helpful :
CPLD